FRAME/LOOM

step 1.jpg
step 2.jpg

Step 1: Thread the warp yarn all the way through the first bottom left hole and first top left hole leaving a tail that is about 5" long. 

Step 2.jpg
Step 2 Zoom.jpg

Step 2: Take the tail and thread it through the second hole on the bottom left. 

Step 3.jpg
Step 3 Zoom.jpg

Step 3: Tie the tail to the first warp string using a double overhand knot or knot of your choosing. 

Step 4.jpg

Step 4: Thread the tail back through the first hole on the bottom left.

Step 5.jpg

Step 5: Pull the knot down into the hole so that it is invisible. Leave the tail string long until you have finished weaving so that you can make any necessary adjustments. 

Step 6.jpg

Step 6: Continue threading through the top and bottom cross beams all the way through the last hole on the bottom right. Make sure to keep the tension tight throughout.

Step 7.jpg

Step 7: Thread the remaining warp yarn back through the second hole on the bottom right. 

Step 8.jpg

Step 8: Secure the tension by tying the remaining warp to the last warp string using a double over hand knot or knot of your choosing. Make sure to use both hands to keep the tension. 

Step 10.jpg

Step 10: Pull the knot down into the hole so that it is invisible. Leave the tail long until you have finished weaving so that you can make any necessary adjustments.

Step 9.jpg

Step 9: Thread the remaining warp yarn back through the last hole on the bottom right. 

 
 

purchase FRAME/LOOM here.

WeavingRachel Snack